3Com 100Base-FX SFP (3CSFP81) in an HP ProCurve 2610-48 SFP port
Will a 3Com 3CSFP81 100Base-FX 1300 nm SFP transceiver work in the mini-GBIC slot of an HP ProCurve 2610-48 switch, now that 3Com is part of HP?
Will a 3Com 3CSFP81 100Base-FX 1300 nm SFP transceiver work in the mini-GBIC slot of an HP ProCurve 2610-48 switch, now that 3Com is part of HP?
Can third-party 100GbE DACs connect QFX5200-32C switches to an all-flash storage array without a vendor block? Which EEPROM compatibility and exact-pairing checks are needed before production use?
A Dell Connectrix (rebadged Cisco) MDS 9148S or 9148T running NX-OS 8.4(2a) or 8.4(2f) keeps some FC ports dowwn and logs %PORT-3-IFUNSUPPORTEDTRANSCEIVER: Transceiver for interface fcx/y is not supported, %KERN-3-SYSTEMMSG: GBIC/SFP checksum error ref port:30 - kernel and %PORT-5-IFDOWN…
A 100G link between a Nexus 7700 (Ethernet3/2) and a Catalyst 9500 (HundredGigE1/0/49) used third-party LR4 modules. With service unsupported-transceiver on both boxes the Nexus still logged %ETHPORT-3-IFUNSUPPORTEDTRANSCEIVER and an 'SFP security check: MD5 failed' line, and the interface stayed…
Can an ISR G2 router with the EHWIC-1GE-SFP-CU card run non-Cisco SFP modules, and what configuration is required?
Setting up an N3K-C3064PQ-10GX on NX-OS 7.0.3.I4.6 with non-Cisco SFP+ modules and DAC cables up to 5 m to servers: after service unsupported-transceiver some ports still show no link, or the link disappears after a while, and one port endd in 'Error disabled. Reason: Too many link flaps'. Which…
Is there any 10 Gigabit bidirectional (single-strand) XFP that the MX80 officially supports for its built-in XFP ports?
Can two HP 1910-8 JG536A switches use a D-Link DEM-330T/DEM-330R BiDi pair instead of HP-branded optics? Is this model known to reject those modules, and is the lower-rate DEM-220 pair a separate compatible option?
We are moving the office uplinks from copper to fibre and the quote that came back has DrayTek-branded optics in every line. Before I start arguing about the difference against ordinary 10G modules I would like to know whether the hardware actually cares what sits in the cage, because the…
We took over a pair of ZS3-2 controllers together with the shelves behind them, and I am the one who has to order optics before they go back into service. The controller service manual is very short on this point: it lists the NIC and HBA options, and for the 10GbE SFP+ card it names exactly two…
Small office, one Firebox M470 on the perimeter, and I wanted to move the link to the core switch off copper and onto the built-in SFP+ ports. Bought a pair of generic SFP+ modules for it, one for each end. The switch side lights up straight away, the Firebox side never does. Kit: WatchGuard…
We run a small regional network and pulled a spare 7050T out of stock to use as a DWDM aggregation box. Arista-coded DWDM optics for it quote close to the price of the switch, so we bought third-party DWDM SFP+ instead, and now the switch will not talk to them. Arista 7050T, EOS 4.10.6 generic…