FlashSystem FC ports reported inactive_configured: SFP fitted but nothing connected
The GUI of an IBM FlashSystem 900 raises warnings for Fibre Channel ports that are not in use. What do the reported port states mean and how do you stop the alerts?
The GUI of an IBM FlashSystem 900 raises warnings for Fibre Channel ports that are not in use. What do the reported port states mean and how do you stop the alerts?
A genuine IBM 10Gb SR SFP+ transceiver (option 46C3447) does not come up in an IBM RackSwitch G8264CS or in a Flex System Fabric CN4093 converged switch, even though the part is on the supported list. Is the module faulty?
A 10GbE converged network adapter in an IBM System x server with a third-party Twinax/DAC cable or SFP+ shows a flapping link and the port LEDs stay dark. Is the cable defective?
A QFX5200 100G port was channelized with a breakout cable into 4x25G (et-0/0/18:0 to :3) to connect an IBM System z OSA adapter. The configuration uses gigether-options fec fec91 and the commit succeeded, but the interface still reports Ethernet FEC Mode: FEC74 and the mainframe side logs error…
We run a couple of IBM Power boxes next to a small SAN, and I am trying to write down a sane spares policy before the next hardware maintenance renewal. The part I cannot pin down is the transceiver itself: on some adapters it looks like a field-replaceable part in its own right, on others a…
Two Flex System enclosures, each with an EN4093R 10Gb Scalable Switch (option 49Y4270) as the network module. Ports come back error-disabled after a chassis power event, and less often drop into the same state while everything is running. It is not always the same ports, which is what makes this so…