ConnectX-6 Lx MCX631102AN-ADAT detects modules but never links to a 10G switch
A ConnectX-6 Lx MCX631102AN-ADAT in Proxmox VE 7 (kernel 5.11) enumerates both ports normally, but the link never comes up towards a 10G switch port and no LEDs light on either side. Tests included 25G-rated SFP28 modules (expecting a 10G fallback), SFP+ modules, several patch cords and forced 1G/10G speeds,. What is wrong?
Comments 2
The reported case was resolved by replacing the incompatible modules. The NIC enumerating correctly and exposing an EEPROM dump did not prove that the attached optics could operate at the requested rate.
For a 10G peer, verify both the adapter's qualified list and the module's 10G capability. A 25G-labelled SFP28 does not automatically provide a 10G optical fallback on every adapter.